1. Brief introduction of product: Gauge hatch is one of the main equipment in top of oil tank and is arranged on the tank top. It mainly used for measuring the oil level and sampling; Under the cover is embedded with oil resistant rubber pad to keep the seal between the shell and cover. It should be installed vertically in the tank top and a tilt is not allowed. When in use, the loose wheel can open the upper cover, and then to operate. 2. Operation standards: SY/T0525.5—93 oil storage tank gauge hatch 3. Installation Notes: When installing the flange face clean, and then installed in the tank top. 4. Technical parameters:
Drawing No.
specification
dimension（mm）
remarks
d
D1
D
L
H
LMH-1
DN100
φ108
φ170
φ205
330
190
aluminium alloy/foot step type
LMH-1
DN100
φ108
φ170
φ205
330
190
aluminium alloy/foot step type
LMH-2
DN150
φ159
φ225
φ260
360
210
aluminium alloy/rotation type
LMH-2
DN150
φ159
φ225
φ260
360
210
aluminium alloy/rotation type
5. Appearance and installation dimension：
All rights reserved: Wuhan Zhongheng Environment-friendly Energy-saving Project Co., Ltd Technical assistance: EIMM
Copyright(c) 2019 All rights reservedYou are the 1360773th visitor.
National sales telephone:+86-27-87329980Fax: +86-27-87260685Email: whzhhb66@vip.163.com No.:06004582
Your location：Product >>
Accessories of oil tank
